Soundproof a Room and Keep Noise at Bay

Posted on

Soundproof a Room and Keep Noise at Bay – To make a home increase its value and become more enjoyable, you might need to soundproof a room. Recording studios are not the only rooms that require soundproofing. Even rooms inside the house might need to be soundproofed, such as the room for home entertainment or home theater. Noise from in and out of the house can cause disturbance and annoyance, which can be avoided if you know how a room may be soundproofed.

Soundproof a Room and Keep Noise at Bay

Understand the Concept of Sound

Knowing some fundamental principles about sound will greatly help you in soundproofing your home. Know that sounds are produced by mechanical vibrations. Three factors can also affect sounds: distance, mass, and air. Given the limited space in a room, distance is a factor that you have no control of. As with mass, understand that heavier objects may obstruct sounds better than light objects. If you make the mass of your wall twice as much, you can reduce the amount of transmitted sound by half. Also, the higher the frequency of the sound, the harder it can be isolated. Drop the pitch one octave and sound reduction will likewise be lowered by half. Thus, you can hear the bass sound that comes from an arena or concert ground.

Seal Cracks and Holes

The best and easiest way of starting your soundproofing project is to ensure every hole and/or crack in the wall will be sealed. This first step is actually what most DIY-ers fail to recognize. You must check not only the walls but also electrical boxes, light switches, heat vents, wires and pipes, doors and also windows. Gaps in any of these areas can be an excellent crack through which sounds may pass through. There are appropriate fillers you can use such as silicone caulk and foam.

Upgrade Your Door

Improving the door of a room can have a significant effect on your project. Many of the doors used inside the house or a structure have hollow cores. Hollow-core doors are certainly not useful in limiting the propagation or transmission of sounds. Thus, you might need to consider upgrading your door. You can replace it with a solid-core type of door or you may simply fill your door’s hollow core with other materials. This way, you can reduce the amount of sound that can travel through the door. You also need to take a look at the gaps around and under the door through which sound may travel. Carefully apply weather stripping to offer a tight seal necessary for successful soundproofing.

Pay Attention to The Windows

You can just hang heavy drapes over the windows you have in the room, yet this alone cannot completely block the sounds. You can choose to upgrade to double pane windows. Gaps around the windows should also be sealed to disallow noise to pass.

Examine the Heating System

A heating can produce noise by itself. Furthermore, the ducts where hot air usually is found can readily carry sounds from one room of the house to another. Rigid ducts can actually carry more sounds than the flexible ones. Thus, consider getting a flexible duct when putting up a new heating system if you are planning on soundproofing your home in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *